Device restarted (uptime low)-juniper-junos

Device restarted (uptime low)-juniper-junos

Vendor: juniper

OS: junos

Description:
Indeni will alert when a device has restarted.

Remediation Steps:
Determine why the device was restarted.

How does this work?
This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the “show system uptime” command. The output includes the device’s uptime as well as additional information.

Why is this important?
Capture the uptime of the device. If the uptime is lower than the previous sample, the device must have reloaded.

Without Indeni how would you find this?
It is possible to poll this data through SNMP or capture a syslog/trap event of a device booting up.

junos-show-system-uptime

name: junos-show-system-uptime
description: Fetches system uptime
type: monitoring
monitoring_interval: 5 minute
requires:
    vendor: juniper
    os.name: junos
    high-availability:
        neq: 'true'
comments:
    uptime-milliseconds:
        why: |
            Capture the uptime of the device. If the uptime is lower than the previous sample, the device must have reloaded.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show system uptime" command. The output includes the device's uptime as well as additional information.
        can-with-snmp: true
        can-with-syslog: true
    current-datetime:
        why: |
            Capture the current date and time of the device. Device current date and time should never be more than 24 hours away from date and time of the device polling the data, otherwise date and time are not correctly set on device.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the current time using the output of the "show system uptime" command. The output includes the device's current date and time as well as configured time zone.
        can-with-snmp: true
        can-with-syslog: false
    timezone:
        why: |
            Capture the current time zone of the device. The time zone information is useful for display purposes.
        how: |
            This script logs into the Juniper JUNOS-based device using SSH and retrieves the configured time zone using the output of the "show system uptime" command. The output includes the device's current date and time as well as configured time zone.
        can-with-snmp: false
        can-with-syslog: false
steps:
-   run:
        type: SSH
        command: show system uptime | display xml
    parse:
        type: XML
        file: show-system-uptime.parser.1.xml.yaml

cross_vendor_uptime_low

Failed to fetch the data: https://bitbucket.org/indeni/indeni-knowledge/src/master/rules/templatebased/crossvendor/cross_vendor_uptime_low.scala