TX packets experienced errors for Juniper

Vendor

Juniper

Description

Indeni tracks the number of packets that had issues and alerts if the ratio is too high.

Remediation Steps

Packet errors usually occur when there is a mismatch in the speed and duplex settings on two sides of a cable, or a damaged cable.

1. Run the "show interface extensive" command to review the interface error counters.


2. Check for a mismatch in the speed and duplex interface settings on the both sides.

3. Check the physical cable. It might be damaged or incorrect type is used.

4. Review the following article on Juniper tech support site: Operational Commands

5. If the problem persists, contact the Juniper Networks Technical Assistance Center (JTAC)

How does this work?

This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.

Why is this important?

This script logs into the Juniper JUNOS-based device using SSH and retrieves the output of the "show interfaces extensive" command. The output includes all the interface related information and statistics.

Without Indeni how would you find this?

There are many solutions out there for tracking traffic flow on network interfaces and alerting when critical indicators are reached.


View Source Code